unique uto spares.car shocker supplier. car shocker.German Car Suspansion parts supplier in Bangalore.Function: Connects the wheel hub and steering knuckle to the vehicle frame, allowing for up-and-down movement while controlling the wheel's alignment. Types: Upper and lower control arms. Common in both front and rear suspensions. Signs of Wear: Clunking noises, uneven tire wear, steering instability. 2. Shock Absorbers (Shocks) Function: Dampens the movement of the springs to reduce bounce and provide a smooth ride. Types: Hydraulic shocks. Gas-filled shocks (common in BMWs for better performance). Signs of Wear: Excessive bouncing, poor handling, and leaking fluid. 3. Struts Function: A structural part of the suspension system that integrates the shock absorber with the coil spring, supporting the weight of the vehicle. Signs of Wear: Bumpy ride, nose-diving during braking, and knocking noises. 4. Coil Springs Function: Supports the vehicle's weight and absorbs large impacts from road irregularities. Location: Usually located around the shock absorbers or struts. Signs of Wear: Sagging vehicle height, reduced ground clearance, uneven tire wear. 5. Sway Bars (Stabilizer Bars) Function: Reduces body roll during cornering and sharp turns by distributing the force evenly between the wheels. Signs of Wear: Excessive body lean during turns and knocking noises when going over bumps. 6. Ball Joints Function: Connects the control arms to the steering knuckles, allowing for smooth rotational movement and flexibility in the suspension system. Signs of Wear: Steering play, clunking noises, and uneven tire wear. 7. Bushings Function: Rubber or polyurethane components that cushion the joints between suspension parts, reducing vibration and noise. Signs of Wear: Increased vibration, knocking noises, and poor handling. 8. Tie Rods Function: Connects the steering rack to the steering arm, ensuring the wheels turn when the steering wheel is rotated. Signs of Wear: Loose steering, uneven tire wear, and vibrations. 9. Wheel Bearings Function: Allows the wheels to spin freely while supporting the vehicle’s weight. Signs of Wear: Grinding noises, uneven tire wear, and wheel vibration. 10. Air Suspension Components (For Models with Air Suspension) Function: Uses airbags instead of coil springs to adjust the ride height and stiffness for better comfort and handling. Signs of Wear: Sagging suspension, uneven ride height, or failure to adjust height. Common BMW Models and Their Suspension Components: BMW 3 Series (F30): Multi-link rear suspension and MacPherson strut front suspension. BMW 5 Series (G30): More advanced air suspension systems in higher trims for better comfort.unique auto spares, BMW X5/X7: Often equipped with air suspension systems and advanced off-road adaptive suspension.Bangalore Car Suspansion parts supplier,